Equipment Overview:

       The diamond drop weight impact testing machine can be used to test the impact resistance of diamond composite sheet。(The test method is to lift a certain mass of the hammer to a set height, and then release from static, the hammer free fall impact on the diamond composite sheet, after the impact is completed to observe whether the diamond layer and matrix of the diamond composite sheet are intact。And the hammer head can be replaced to achieve the secondary processing embrittlement temperature of the steel plate (the test method is to place the cup sample on the base after holding it at different temperatures for a certain period of time, and the heavy hammer with a specific cone Angle falls freely from the height to impact the cup mouth with a specific energy，The test temperature of the drop hammer impact is continuously lowered until the sample cup breaks，Determination of secondary processing embrittlement temperature of steel plate)。

Main features:
1: The machine is equipped with automatic control system to realize the automatic process of lifting, impact and grasping the hammer, which greatly reduces the labor intensity of the operator and improves the work efficiency and operation safety。
2: Siemens PLC programmable controller is used to design the automatic control system of the testing machine, equipped with a touch screen as a terminal operator。
3: Due to the high reliability and stability of PLC, anti-interference ability is very strong, so the reliability and stability of the whole control system is also very high, there will be no misoperation, which greatly improves the safety of the test personnel。
4: Convenient replaceable hammer method suitable for different types of sample requirements。
5: High-precision and accurate positioning device to achieve accurate impact。

Meet the criteria:

Test method for embrittlement of GB24173-2009-T steel plate after processing

Technical parameters:

Model number DIT122Z-1

The impact energy range is 5J ~ 120J

The total weight of the hammer is 10kg

The weight of the hammer is 5kg

Weight mass 2.5kg/ block (total 2 pieces, 5kg)

The weight error of the hammer body is ±1%

Weight mass error ±0.5%

Impact height 100mm ~ 1300mm

Impact velocity 1.4m/s～5.0m/s

The lifting speed is about 3m/min

Height measurement error ≤±1mm

Main power supply single-phase 220VAC±10% 50Hz 

The weight of the machine is about 300kg

   The testing machine can not only be used to test the impact resistance of the diamond composite sheet, but also can replace the hammer head to realize the catalytic temperature of the secondary processing of the steel plate。